What To Know
- The ASUS ROG Ryujin II 360 is a top-tier liquid cooler designed to tame even the most demanding CPUs.
- This guide will walk you through the process of installing the ASUS ROG Ryujin II 360, step-by-step, ensuring a smooth and successful installation.
- Align the fans with the radiator, ensuring their arrows point in the correct direction (towards the radiator).
The ASUS ROG Ryujin II 360 is a top-tier liquid cooler designed to tame even the most demanding CPUs. Its powerful pump, efficient radiator, and RGB-infused aesthetic make it a popular choice for enthusiasts. But before you can experience its cooling prowess, you need to install it correctly. This guide will walk you through the process of installing the ASUS ROG Ryujin II 360, step-by-step, ensuring a smooth and successful installation.
Preparing for Installation
Before diving into the installation, it’s crucial to gather the necessary tools and prepare your system. Here’s what you’ll need:
- ASUS ROG Ryujin II 360: Make sure you have all the components, including the pump, radiator, fans, mounting brackets, screws, and thermal paste.
- Phillips Head Screwdriver: For securing the cooler and fans.
- Anti-Static Wrist Strap: To protect your components from static discharge.
- Clean Cloth: For wiping away any dust or fingerprints.
- Optional: Zip Ties: For cable management.
Important Note: Before starting any hardware installation, always ensure your computer is powered off and unplugged.
Step 1: Removing the Stock Cooler
The first step is to remove your CPU’s existing cooler. This process varies depending on your motherboard and cooler. Generally, it involves:
1. Unplugging the Cooler Fan: Disconnect the fan’s power connector from the motherboard.
2. Releasing the Cooler Mount: Locate the cooler’s mounting mechanism (usually a lever or push-pin system) and release it.
3. Lifting the Cooler: Carefully lift the cooler straight up, ensuring it doesn’t snag on any cables.
Step 2: Applying Thermal Paste
Thermal paste is crucial for transferring heat from your CPU to the cooler’s cold plate. Apply a thin, even layer to the top of your CPU. Avoid applying too much, as this can hinder heat transfer.
Tips for Applying Thermal Paste:
- Use a pea-sized amount of thermal paste.
- Spread it evenly with your finger or a dedicated applicator.
- Ensure the paste covers the entire surface of the CPU.
Step 3: Installing the Pump
The ASUS ROG Ryujin II 360’s pump features a unique design with a built-in OLED display. Here’s how to install it:
1. Align the Mounting Brackets: Align the pump’s mounting brackets with the corresponding holes on your motherboard.
2. Secure the Pump: Use the provided screws to tighten the pump onto the motherboard, ensuring it’s securely attached.
3. Connect the Pump Power: Connect the pump’s power connector to the motherboard’s CPU_FAN header.
Important Note: The pump’s mounting bracket may need to be adjusted depending on your motherboard’s socket type. Consult the ASUS ROG Ryujin II 360’s manual for specific instructions.
Step 4: Mounting the Radiator
The radiator is responsible for dissipating the heat absorbed by the pump. Here’s how to mount it:
1. Choose a Location: Select a suitable location for the radiator, preferably inside your PC case‘s front or top.
2. Align the Mounting Brackets: Align the radiator’s mounting brackets with the corresponding holes on your PC case.
3. Secure the Radiator: Use the provided screws to tighten the radiator onto the PC case.
Important Note: Ensure the radiator’s fans are positioned to blow air out of your PC case.
Step 5: Installing the Fans
The ASUS ROG Ryujin II 360 comes with three ARGB fans specifically designed for optimal airflow. Here’s how to install them:
1. Align the Fans: Align the fans with the radiator, ensuring their arrows point in the correct direction (towards the radiator).
2. Secure the Fans: Use the provided screws to tighten the fans onto the radiator.
3. Connect the Fan Power: Connect the fans’ power connectors to the included fan hub.
Important Note: The fan hub provides a single connection point for all three fans, simplifying cable management.
Step 6: Connecting the ARGB Lighting
The ASUS ROG Ryujin II 360 features stunning RGB lighting, enhancing your PC’s aesthetic. Here’s how to connect it:
1. Connect the ARGB Cable: Connect the ARGB cable from the pump to the motherboard’s ARGB header.
2. Connect the Fan Hub: Connect the fan hub‘s ARGB cable to the motherboard’s ARGB header.
Important Note: The ARGB header location may vary depending on your motherboard. Consult your motherboard’s manual for specific instructions.
Step 7: Final Touches
Once you’ve completed the installation, take a moment to ensure everything is secure and connected properly.
- Check for Loose Connections: Make sure all cables are securely connected to their respective headers.
- Cable Management: Organize the cables neatly to prevent clutter and improve airflow.
- Power On and Test: Power on your PC and check that the cooler is functioning correctly.
Final Thought: Enjoying Your New Cooler
After successfully installing the ASUS ROG Ryujin II 360, you’ll be able to enjoy its exceptional cooling performance and stunning aesthetics. Remember to monitor your CPU temperatures to ensure the cooler is effectively keeping your system cool.
Questions We Hear a Lot
1. Can I use the ASUS ROG Ryujin II 360 with a different CPU socket?
The ASUS ROG Ryujin II 360 is compatible with various CPU sockets, but you may need to purchase additional mounting brackets. Consult the ASUS website or the cooler’s manual for specific compatibility information.
2. How do I control the RGB lighting on the ASUS ROG Ryujin II 360?
The RGB lighting can be controlled using the ASUS Aura Sync software, which allows you to customize the lighting effects and synchronize them with other compatible components.
3. What is the warranty on the ASUS ROG Ryujin II 360?
The ASUS ROG Ryujin II 360 comes with a 2-year warranty.
4. Is the ASUS ROG Ryujin II 360 compatible with AMD CPUs?
Yes, the ASUS ROG Ryujin II 360 is compatible with both Intel and AMD CPUs.
5. How often should I replace the thermal paste on the ASUS ROG Ryujin II 360?
It’s recommended to replace the thermal paste every 1-2 years, depending on usage and environmental factors. However, if you notice a significant increase in CPU temperatures, it may be time to replace the paste sooner.
